轧钢机设备主要用来为轧制小型线材，采用三辊式工作机座。轧钢机的主要设备是由一个主机列组成的。轧钢机的主机列是由原动机，传动装置和执行机构三个基本部分组成的。采用的配置方式为电动机——减速机——齿轮机座——轧钢机。由于轧辊的转向和转速不可逆转，原动机采用造价较底的高速交流主电机。考虑到轧制负荷很不均匀，为了均衡电机负荷，减少电机的容量，在减速机和电动机之间加有飞轮。齿轮机座：其用途是传递转矩给工作辊，设计采用三个直径相等的圆柱形人字齿轮在垂直面排成一排，装在密闭的箱体内。联轴器：在减速器与齿轮机座之间采用的是安全连轴器。而主联轴器采用的的梅花接轴联轴器。适用范围:要用于生产轧制螺纹钢、扁钢、方钢、角钢、槽钢、亦可轧制其它品种型材、铝、铜、板材、带钢、等废旧钢材的改制。

The steel rolling mill equipment is mainly used for rolling small wire rods and adopts a three-roll working base. The main equipment of a steel rolling mill is composed of a main train. The main train of a steel rolling mill is composed of three basic parts: the prime mover, the transmission device and the actuator. The adopted configuration is motor - reducer - gear base - steel rolling mill. Since the rotation direction and rotational speed of the rolls are irreversible, the prime mover adopts a high-speed AC main motor with a relatively low cost. Considering that the rolling load is very uneven, in order to balance the motor load and reduce the motor capacity, a flywheel is added between the reducer and the motor. Gear housing: Its function is to transmit torque to the work roller. The design adopts three cylindrical herringbone gears of equal diameters arranged in a row on the vertical plane and installed in a sealed box. Coupling: A safety coupling is used between the reducer and the gear housing. The main coupling adopts a star-shaped coupling. Scope of application: It is used for the production of rolled threaded steel, flat steel, square steel, Angle steel, channel steel, and can also be used for the modification of other types of sections, aluminum, copper, plates, strip steel, and other scrap steel.